Sony MZ-NH1 MiniDisc Player User Manual


 
91
PUSH STOP
BUTTON
You tried to open the lid by sliding the OPEN switch while the recorder
was storing disc information with the dedicated USB cable connecting
the recorder to a computer.
, Operation must be done only after pressing x and “SYSTEM FILE
WRITING” has disappeared from the display.
READ ERROR The recorder cannot read the disc information correctly.
, Reinsert the disc.
REC ERROR Recording was not correctly done.
, Place the recorder at a place with no vibrations and record again.
The disc is soiled with an oil film or finger prints, is scratched, or is not a
standard disc.
, Try recording again with another disc.
SYSTEM FILE
WRITING
The recorder is storing information (track start and end position) from
the memory to the disk.
, Wait until this process is completed. Do not expose the player to
physical shock, nor disrupt power supply.
TEMP OVER
REC STOP
Heat has built up in the recorder.
, Let the recorder cool down.
TITLE FULL You tried to enter characters that exceeds the maximum number for a
title.
—For the European, North American and Australian models:
More than 200 characters to label a single track, group, or disc.
—For the Asian, African and tourist models:
More than 100 characters (in Hi-MD mode) or 200 characters (in MD
mode) to label a single track, group, or disc.
You tried to enter characters that exceeds the maximum number for a
disc.
—For the European, North American and Australian models:
A total of more than approximately 55,000 characters (in Hi-MD
mode) or 1,700 characters (in MD mode) for titles in a disc.
—For the Asian, African and tourist models:
A total of more than approximately 27,000 characters (in Hi-MD
mode) or 1,700 characters (in MD mode) for titles in a disc.
TOC DATA
ERROR
The recorder cannot read the disc information correctly.
, Insert another disc.
, If it is no problem to erase the entire disc, do so (page 61).
TRACK FULL You tried to record more than 2,047 tracks on a disc in Hi-MD mode or
more than 254 tracks on a disc in MD mode.
, Erase unnecessary tracks (page 60).
TRK FROM PC
NO EDIT
You tried to combine or divide tracks that were transferred from the
computer.
, You cannot combine or divide transferred tracks.
You tried to combine or divide tracks that were recorded in Hi-MD mode
using the MD Simple Burner software.
, You cannot combine or divide tracks recorded in Hi-MD mode with
the MD Simple Burner software.
Message Meaning/Remedy