Filter
Top Products
55
•If you enter the symbol “//” between the
characters in disc names such as “abc//def”,
you may be unable to use the group function
(in MD mode only).
•On the remote control for the Asian, African
and tourist models, Chinese characters can be
displayed but cannot be input. You can input
Chinese characters with the SonicStage
software.
You can label a track, group, or disc while
the recorder is stopped, recording or
playing. You can also label artist names
and album names to tracks in a disc used
in Hi-MD mode. Note that if you label a
track name, an artist name, or an album
name to a track while the recorder is
stopped, the track must be the currently
selected.
You can label a group while the recorder
is recording or playing a track in the
group, or while a track in the group is
selected and the recorder is stopped.
1 Enter the menu and select “Edit” -
“Title Input”.
2 Select one of the following, and then
press the jog dial.
The cursor flashes in the letter input
area and input of the title becomes
possible.
3 Press DISPLAY.
The cursor shifts from the letter input
area to the character palette.
4 Select a letter using the buttons and
the controls, and then press the jog
dial to enter.
The selected letter appears in the
letter input area and the cursor moves
to the next input position.
Notes
Labeling
VOL +, –
Jog dial
P-MODE •
REPEAT
DISPLAY •
BACKLIGHT
SOUND •
SOUND SET
Jog lever (NX •
ENTER, .,
>)
x
Title Display
Track name “Track”
Group name “Group”
Artist name (to a track)
1)
1)
Appears only for discs used in Hi-MD mode.
“Artist”
Album name (to a track)
1)
“Album”
Disc name “Disc”
The cursor flashes.
The cursor and character alternate.
The cursor flashes at the next input position.
continued