Filter
Top Products
50
3 Turn the jog dial to select the sound
mode.
Each time you turn the jog dial, A
and B change as follows:
4 Press the jog dial to enter the selected
sound mode.
To cancel the setting
Press SOUND repeatedly until “Normal”
appears in A and the indication at B
disappears.
To modify and store the sound
You can modify the sound and store the
results in “Custom1” and “Custom2”.
1 Do steps 1 to 3 of “Selecting the
sound quality (6-Band Equalizer)”
(page 49), and turn the jog dial until
“Custom1” or “Custom2” appears.
2 Press the jog dial.
3 Slide the jog lever repeatedly to select
the frequency.
4 Turn the jog dial to adjust the level.
5 Repeat steps 3 and 4 to adjust the
level for each frequency.
6 Press the jog dial to enter the
selection.
•Virtual-Surround and 6-Band Equalizer will
not function during recording.
•Virtual-Surround and 6-Band Equalizer stop
functioning whenever an external component
is connected to the i/LINE OUT jack.
AB
Heavy SND H
Pops SND P
Jazz SND J
Unique SND U
Custom1 SND 1
Custom2 SND 2
Notes
Custom1
Frequency (100 Hz)
From the left, you can select 100 Hz,
250 Hz, 630 Hz, 1.6 kHz, 4 kHz, or 10 kHz
Custom1
Level (+10 dB)
You can select from among seven levels.
–10 dB, –6 dB, –3 dB, 0 dB, +3 dB, +6 dB,
+10 dB