Filter
Top Products
42
•The pause function cannot be turned on or off
manually during synchro-recording.
•Do not switch the “SYNC REC” setting while
recording. Recording may not be done
properly.
•Even when there is no sound on the sound
source, there may be cases when recording
does not pause automatically during synchro-
recording due to the noise level emitted from
the sound source.
•If a silent portion is encountered for
approximately 2 seconds during synchro-
recording from a sound source other than a
CD or an MD, a new track mark is
automatically added at the point where the
silent portion ends.
1 Make connections.
Use the appropriate optical cable to
suit the source equipment. For details,
see “Optional accessories” (page 79).
2 While the recorder is stopped, enter
the menu and select “REC Set” -
“SYNC REC” - “SYNC On”.
Notes
On the recorder
MENU
5-way control key
(NENT, FR, FF)