Filter
Top Products
23
4
Record a disc.
1Select and pause the sound source to
be recorded.
2Make sure that disc indication has
stopped rotating in the display window
on the recorder.
3While the recorder is stopped, press
and slide zREC on the recorder.
“REC” and the REC lamp light up and
recording starts.
4Play the source you want to record.
If you insert a previously recorded disc,
the recording starts after the existing
contents.
Track marks are automatically added at
the same point as the sound source, and
the contents are recorded together as a
group.
PAUSE
Connected component
Make sure that disc indication has
stopped.
zREC
PAUSE
Connected component
To Press
Stop Press x.
Pause Press X
1)
.
Press X again to resume recording.
Remove the disc Press x and open the lid. (The lid does not open while “SYS
WRITE” flashing in the display.)
1)
A track mark is added at the point where you press X again to resume recording while pausing; thus
the remainder of the track will be counted as a new track.