Filter
Top Products
– 19 –
4-7. KEY CHECK MODE
This set can check if the set and remote commander function nor-
mally.
• Setting Method of Key Check Mode
1. Setting the test mode. (See page 13)
2. Press the [T MARK] or [DISPLAY] key on the remote com-
mander for several seconds activates the key check mode where
all segments of LCD turn OFF. (At the last two digits of DOT
section, AD value of remote commander key line is displayed
in hexadecimal)
3. When each key is pressed, it is displayed on the LCD, imply-
ing that it was successfully checked as shown below. How-
ever, for the slide switch on the set, it is not checked unless it
is reciprocated.
* The key pressed to enter the key check mode was already
checked at that time.
Set key
Key Indication
N PLAY
> FF
. FR
X PAUSE
VOL + VOL +
VOL – VOL –
x STOP
REC REC
END SEARCH END S
MENU . JOG+
MENU > JOG–
ENTER PUSH
T MARK T MARK
HOLD (hold) HLDon
HOLD (off) HLDoff
SYNCHRO REC (on) SYCon
SYNCHRO REC (off) SYCoff
Remote commander key
Key Indication
N/> rPLAY
. rFR
X rPAUSE
VOL + rVOL +
VOL – rVOL –
x rSTOP
PLAYMODE rPMODE
DISPLAY rDISP
HOLD (hold)
HOLD (off)
4. The test mode (display check mode) is automatically activated
when all keys on the set and remote commander were checked
(see above). Also, the test mode (display check mode) gets
back if opening the upper panel during a key check.