Filter
Top Products
Chapter 1: Setting Up
4
Chapter 1:
Setting
Up
Connecting the Stereo
Inserting the Battery
Setting the Clock
Connecting the
Stereo
Use the illustrations below to connect your
stereo.
If you want to connect any optional
components to the stereo, see “Connecting
Optional Equipment” in Chapter 8.
Connecting the
Speakers
Connect the right speaker to the SPEAKER
R connectors and the left speaker to the
SPEAKER L connectors with the gray cord
to ‘ (gray) and the black-lined cord to ’
(black).
Connecting the
Antennas
FM lead antenna connection
Connect the supplied lead antenna to the
FM 75Ω terminal.
AM loop antenna connection
Connect the supplied loop antenna to the
AM and the y terminals.
STEP 1
STEP 2
R
L
Gray cord to ‘
(gray)
Black-lined cord to ’
(black)
FM
AM
75
To set up the AM loop antenna
To improve the FM reception
Connect an outdoor FM antenna to the FM
75Ω terminal, using a 75-ohm coaxial cable.
To improve the AM reception
After you connect the AM antenna, connect
a 6- to 15-meter insulated wire to the AM
terminal. Connect the y terminal to earth.
Important
Ground the external antenna against
lightning from the y terminal.
To prevent a gas explosion, do not connect
the ground wire to a gas pipe.
FM
AM
75
75-ohm coaxial cable
(not supplied)
FM
AM
75
Ground wire
(not supplied)
Insulated wire
(not supplied)
FM
AM
75