Filter
Top Products
Chapter 3:
P
laying MDs
13
Playing Tracks in
Random Order
(shuffle play)
You can play all the tracks on the MD in
random order.
1 Press MD.
The unit enters MD play mode.
2 Press PLAY MODE (or P.MODE on the
remote) repeatedly until “SHUFFLE”
appears in the display.
3 Press fl.
“ J ” appears and then all the tracks
play in random order.
To cancel shuffle play
Press and then press PLAY MODE
repeatedly until “SHUFFLE” and
“PROGRAM” disappear from the display.
The tracks continue playing in their original
order.
To skip an undesired track
Turn the JOG dial clockwise (or press +
on the remote).
Playing Tracks in the
Desired Order
(program play)
You can program up to 25 tracks to play in
any order you choose. You can do this by
designating the tracks in the order you
want them to play.
1 Press MD.
The unit enters MD playing mode.
2 Press PLAY MODE (or P.MODE on the
remote) repeatedly until “PROGRAM”
appears in the display.
3 Turn the JOG dial (or press =/+
on the remote) to choose a track.
The track number and the total playing
time including the selected track appear
in the display, and the track number
flashes in the music calendar. (The
program is not entered at this time.)
VOLUME
MD
4
TOC
PROGRAM
6
11
9
Last programmed
track number
Total playing time
(
=
(
P
+
p
rPp
2
4
Press ENTER/YES.
The step number appears for about one
second, then the total playing time
appears. (This shows that the program
has been entered.)
5 To program additional tracks, repeat
steps 3 and 4.
6 Press fl.
All the tracks play in the order you
choose.
To cancel the program play
Press and then press PLAY MODE
repeatedly until “PROGRAM” and
“SHUFFLE” disappears from the display.
The tracks continue playing in their original
order.
To select tracks using the number
buttons on the remote
In step 3, press the number buttons in the
order you want to program. Each time you
press a button, the track you selected is
programmed.
You don't need to press ENTER/YES.
To program a track with a number greater
than 10, press >10 first, then enter the
corresponding digits.
If the track number is 100 or more, press
>10 twice and enter the number.
Example:
To locate track number 30, press >10, 3,
and 10 in this order.
To locate track number 100, press >10,
>10, 1, 10 and 10 in this order.
To change the program
Notes
•The program you made remains in the
unit even after it has been played back.
Press fl to play the same program
again.
• If “--.--” appears instead of the total
playing time during programming, this
means the total playing time has
exceeded 100 minutes. In this case, you
can also select other tracks.
To
Add a track at
the end of the
program
Erase the entire
program
Operation
1.Turn the JOG dial
until the desired track
number appears in
the display.
2.Press ENTER/YES.
During stop, press on
the player.
POWER m ON
2
3
„
1
(
=
(
P
+
p
r
Pp
POWER m ON
261
34
2
3
6
>10
Numeric
buttons
„
Go to previous
track
›–
Go to next
track
Track number
VOLUME
MD
4
TOC
PROGRAM
3215
987610
11