Filter
Top Products
Getting Started
masterpage:Left
(3 column)
filename[\\WIN-48\NAKAYAMA 3-1\4233926121 3.14\423392612MDSJE770U2\GB04GET-
U2.fm]
9
model name1[MDS-JE770] model name 2 [MDS-JE470]
[4-233-926-12(1)]
Required cords
A
Audio connecting cords (2) (supplied)
When connecting an audio connecting cord, be sure to
match the color-coded pins to the appropriate jacks:
white (left) to white and red (right) to red.
B
Optical cables (2 for MDS-JE770
European model/3 for all other models)
(only one supplied)
•
When connecting an optical cable, take the caps off
the connectors and insert the cable plugs straight in
until they click into place.
•
Do not bend or tie the optical cables.
C
Coaxial digital connecting cable (for
MDS-JE770 European model only) (1)
(not supplied)
Hookup considerations
•
Turn off the power of all components before
making any connections.
•
Do not connect any AC power cord until all the
connections are completed.
•
Be sure the connections are firm to prevent hum
and noise.
Jacks (connectors) for
connecting audio
components
For MDS-JE770 European model
For MDS-JE770 (except for the
European model)
For MDS-JE470
Setting the voltage selector
(only on models supplied with
a voltage selector)
Check that the voltage selector on the rear panel
of the deck is set to the local power line voltage.
If not, set the selector to the correct position
using a screwdriver before connecting the AC
power cord to a wall outlet.
Other connections
To connect a CONTROL A1ΙΙ
compatible component (MDS-
JE770 only)
D
Monaural (2P) mini-plug cables (2) (not
supplied)
For details, see “Using the CONTROL A1
ΙΙ
control system (MDS-JE770 only)” on page 38.
Connect To the
Amplifiers ANALOG IN/OUT jacks
CD players or DBS
tuners
DIGITAL COAXIAL IN
jack or DIGITAL
OPTICAL IN connector
Digital amplifiers, DAT
decks, or another MD
deck
DIGITAL OPTICAL IN/
OUT connectors
White (L) White (L)
Red (R) Red (R)
Connect To the
Amplifiers ANALOG IN/OUT jacks
CD players or DBS
tuners
DIGITAL OPTICAL IN
1)
connector
1) There is no distinction of IN1 and IN2
connectors.
Digital amplifiers, DAT
decks, or another MD
deck
DIGITAL OPTICAL IN
1)
/
OUT connectors
Connect To the
Amplifiers ANALOG IN/OUT jacks
CD players or DBS tuners DIGITAL OPTICAL IN
connector
continued