Filter
Top Products
masterpage:Left
(3 column)
filename[\\WIN-48\NAKAYAMA 3-1\4233926121 3.14\423392612MDSJE770U2\GB04GET-
U2.fm]
10
model name1[MDS-JE770] model name 2 [MDS-JE470]
[4-233-926-12(1)]
Hooking up the audio
component (continued)s
To connect a PC
E
PC connecting kit (not supplied)
Use the PC connecting kit to connect a PC to the MD
deck. By connecting the MD deck to a PC, you will be
able to select and play MD tracks and do various
editing operations on the PC. For details, refer to the
manual supplied with the PC connecting kit.
Tip
You can connect a PC to the PC LINK (KEYBOARD)
connector on the front panel of the MDS-JE770.
To connect the AC power cord
Connect the AC power cord of the deck to a
wall outlet.
Note
If you use a timer, connect the AC power cord to the
outlet of the timer.
Inserting batteries into the
remote
Insert two R6 (size-AA) batteries into the
battery compartment with the + and – properly
oriented to the markings. When using the
remote, point it at the remote sensor on the
deck.
Tip
When the remote no longer operates the deck, replace
both batteries with new ones.
Notes
•
Do not leave the remote in an extremely hot or
humid place.
•
Do not drop any foreign object into the remote
casing, particularly when replacing the batteries.
•
Do not use a new battery with an old one.
•
Do not expose the remote sensor to direct sunlight or
lighting apparatus. Doing so may cause a
malfunction.
•
If you don’t use the remote for an extended period of
time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
Demonstration mode
When you turn on the MD deck and there is no
MD in the deck, demonstration mode is
activated automatically after about ten minutes.
To deactivate demonstration mode, press any
button on the deck or on the remote.
Tip
To turn off demonstration mode, press
x
and CLEAR
simultaneously when there is no MD in the deck.
“Demo Off” appears in the display.
To turn on demonstration mode again, perform the
same procedure described above.
“Demo On” appears in the display.