Sony MDS-JE770 MiniDisc Player User Manual


 
Playing MDs
filename[\\WIN-48\NAKAYAMA 3-1\4233926121 3.14\423392612MDSJE770U2\GB05OPE-
U2.fm]
21
model name1[MDS-JE770] model name 2 [MDS-JE470]
[4-233-926-12(1)]
masterpage:Left
(3 column)
1) Automatic Music Sensor
2) When you locate a point while monitoring the
sound.
3) When you locate by observing the time
indication.
Tips
The MDLP indicator lights up when you select a
track recorded in LP2 or LP4 Stereo mode.
To use headphones, connect them to the PHONES
jack. Turn PHONE LEVEL to adjust the headphones
level (MDS-JE770 only).
When “– Over –” appears in the display, the MD has
reached the end while you’re pressing
M
. Turn
AMS counterclockwise (or press
.
) or press
m
to go back.
You can adjust the analog signal level output to the
PHONES jack and the ANALOG OUT jacks (MDS-
JE770 only).
1 While the deck is playing, press LEVEL/
DISPLAY/CHAR (or DISPLAY) repeatedly
until the line output adjustment display
appears.
2 Turn AMS (or press LEVEL +/
repeatedly) to adjust the output signal
level.
You can use Setup Menu to adjust the analog output
level (MDS-JE770 only).
1 While the deck is playing, press MENU/
NO.
2 Turn AMS (or press
./>
repeatedly)
until Setup? appears, then press AMS or
YES.
3 Turn AMS (or press
./>
repeatedly)
until Aout appears, then press AMS or
YES.
4 Turn AMS (or press LEVEL +/
repeatedly) to adjust the output signal
level, then press AMS or YES.
5 Press MENU/NO.
Playing a track by entering the track
number
Press the number button(s) on the remote
to enter the track number of the track you
want to play.
To enter a track number over 10
1 Press >10.
“-” equal to the number of digits for the number
of tracks recorded on the MD flashes.
2 Enter the corresponding digits.
To enter 0, press 10/0 instead.
Examples:
To select track number 30 on an MD recorded
with 50 tracks, press >10, then 3 and 10/0.
To select track number 30 on an MD recorded
with 200 tracks, press >10, then 10/0, 3 and 10/0.
Using the MD display
Press LEVEL/DISPLAY/CHAR (or DISPLAY)
repeatedly.
The display changes cyclically as follows:
During playing
MDS-JE770
Track number and elapsed time of the current
track
t
The contents of a program (only when
“PGM” lights up)
t
Disc name and track
name
1)
t
Level of the output signal
t
Pitch
t
“Display Off” (For details, see “Turning off
indications in the display (MDS-JE770 only)”
below.)
MDS-JE470
Track number and elapsed time of the current
track
t
Track number and remaining time of
the current track
t
Remaining time of all
recorded tracks
t
The contents of a program
(only when “PGM” lights up)
t
Track name
1)
Turning off indications in the display (MDS-
JE770 only)
When you select “Display Off” during play, the
display turns off. The display turns back on if you
press
x
or
X
. When you resume play, the display
turns off again.
To deactivate this function, press LEVEL/DISPLAY/
CHAR (or DISPLAY).
Tips
To check the track name during playing (only when
the track name is recorded)
,
press SCROLL on the
remote.
The track name appears and scrolls. While the track
name is scrolling, press the button again to pause
scrolling, and again to continue scrolling.
(MDS-JE770 only) To check the remaining time,
press TIME repeatedly during playing. The display
changes cyclically as follows:
Track number and elapsed time of the current track
t Track number and remaining time of the current
track t Remaining time of all recorded tracks
2)
1) “No Name” appears when the disc or track has no
name.
(MDS-JE770 only) When the Group function is
on, the group name and track name are displayed.
2) When the Group function is on, the remaining
time of all tracks within the group is displayed.
continued