Filter
Top Products
masterpage:Left
(3 column)
filename[\\WIN-48\NAKAYAMA 3-1\4233926121 3.14\423392612MDSJE770U2\GB05OPE-
U2.fm]
22
model name1[MDS-JE770] model name 2 [MDS-JE470]
[4-233-926-12(1)]
Playing an MD (continued)
In stop mode
MDS-JE770
Total number of tracks, total recorded time and
disc name
1)
t
The contents of a program (only
when “PGM” lights up)
t
Level of the input
signal (setting value of the recording level)
t
Pitch
MDS-JE470
Total number of tracks and total recorded time
t
Remaining recordable time
2)
on the MD
(recordable MDs only)
t
The contents of a
program (only when “PGM” lights up)
t
Total
playing time of the program (only when “PGM”
lights up)
t
Disc name
1)
1) “No Name” appears when the disc or track has no
name.
(MDS-JE770 only) When the Group function is
on, the disc name and the total number of groups
(when no group is selected) or the group name
and the total number of tracks and recorded time
within the group (when a group is selected) are
displayed.
2) Time shown in the display differs depending on
the setting of REC MODE.
This function allows you to listen only to your
favorite tracks which you have registered into a
group.
1
Do steps 1 to 3 of “Playing an MD” on
page 20.
2
Press GROUP ON/OFF.
The GROUP ON/OFF button lights up. The
disc name and the total number of groups
appears.
3
Press PLAY MODE repeatedly until the
mode you want appears.
4
Press GROUP SKIP repeatedly until the
group you want to play appears.
5
Press
H
.
6
Adjust the volume on the amplifier.
The deck stops when playback of the last
track in the group ends.
Tip
You can perform the operations described under
Repeat Play (page 20), Other Operations (page 20)
and Program Play (page 22) only for the tracks in the
group.
Note
If you select and play a group that does not have any
tracks registered, play starts from the first track of the
first group on the MD.
Notes when using a remote (RM-TP501,
RM-TP502, RM-TP503, RM-TP504) supplied
with a Sony amplifier or tuner
•
When the Group function is on, if you select and
play a track using any of the above remotes, the
Group function automatically turns off.
•
When the Group function is on, the remote display
for the track number being played may differ from
the deck display.
You can pick out the tracks that you like and
specify the playing order in a program
containing up to 25 tracks.
Programing the tracks
1
Press PLAY MODE repeatedly until
“PGM” lights up in the display.
2
While the deck is stopped, press MENU/
NO.
Playing only the tracks in
the desired group (MDS-
JE770 only)
Select To play
Blank (no PLAY
MODE indication)
The tracks in the group in
the original order.
SHUF The tracks in the group in
random order.
PGM The tracks in the group in
the order you want (see
“Creating your own
program” on page 22).
Creating your own
program
— Program Play