Filter
Top Products
Chapter 1: Setting Up
GB
4
Connecting the
Aerials
AM loop aerial (supplied)
FM lead aerial* (supplied)
*Extend horizontally
AM loop aerial connection
Connect the supplied loop aerial to the AM
and the y terminal.
To improve the FM reception
Connect an outdoor FM aerial to the FM
75Ω terminal, using a 75-ohm coaxial cable
and IEC standard socket connector.
Connecting the
Stereo
Use the illustrations below to connect your
stereo.
If you want to connect any optional
components to the stereo, see “Connecting
Optional Equipment” in Chapter 6.
If you set up the stereo system vertically
Be sure to place the Amplifier/Tuner on
top of the CD player/Tape Deck.
Connecting the
Flat Cords
Connect the supplied flat cords to SYSTEM
CONTROL connectors of the same color by
pressing the centre of the flat cord
connector until it clicks into place.
To disconnect the flat cords
Pull out the flat cord connector while
pressing in on the sides. Do not pull the flat
cord itself.
Connecting the
Speakers
Connect the right speaker to the R
connectors and the left speaker to the L
connectors.
See the instruction manual provided with
the speakers for details of connectors.
Chapter 1:
Setting
Up
Connecting the Stereo
Inserting the Batteries
Setting the Clock
STEP 3
AM
FM 75
COAXIAL
STEP 1
STEP 2
AM
FM 75
COAXIAL
75-ohm coaxial cable
(not supplied)
L
R
+
–