Sony MHC-W55 Stereo System User Manual


 
Chapter 4: the Tape Player
GB
15
Recording a CD
You can record from a CD to a tape. Use
TYPE I (normal) or TYPE II (CrO2) tapes.
Do not use TYPE IV (metal) tapes for
recording.
You cannot listen to other sources while
recording.
Recording a CD
Automatically
By using the CD SYNCHRO button, you
can record from a CD to a tape easily.
Use the buttons on the unit for this
operation.
1 Press § EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording starts from the front side of
the tape, unless you change the playing
direction before recording.
Make sure the tabs on the cassette have
not been removed.
2 Press § OPEN/CLOSE/EX-CHANGE
and place a CD.
Then, press § OPEN/CLOSE/
EX-CHANGE again to close the CD tray.
If the indicator for the disc tray
containing the CD you want to record is
not lit green, press DISC SKIP
repeatedly so that it lights green.
3 Select dual or single-sided recording.
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
4 Press CD SYNCHRO.
Deck B stands by for recording.
5 Press P PAUSE to release recording
pause.
Recording starts.
After about 10 seconds, the CD starts
playing.
To stop recording
Press p on the tape player or the CD
player.
To activate DOLBY NR
When you want to reduce the hiss noise in
low-level high-frequency signals, press
DOLBY NR so that “DOLBY NR B” appears
in the display after step 3.
To record with the surround effect
Press SURROUND so that “SUR
appears in the display.
Recording a CD Manually
You can record a CD as you like, for
instance, record just the songs you want or
record from the middle of the tape.
1 Press § EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording starts from the front side of
the tape, unless you change the playing
direction before recording.
Make sure the tabs on the cassette have
not been removed.
2 Press § OPEN/CLOSE/EX-CHANGE
and place a CD.
Then, press § OPEN/CLOSE/
EX-CHANGE again to close the CD tray.
If the button for the disc tray containing
the CD you want to record is not lit
green, press DISC SKIP repeatedly so
that it lights green.
3 Press FUNCTION to select the CD
player.
4 Select dual or single-sided recording.
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
5 When you want to reduce the hiss noise
in low-level high-frequency signals,
press DOLBY NR so that “DOLBY NR
B” appears in the display.
6 Press r REC.
Deck B stands by for recording.
7 Press P PAUSE to release recording
pause.
Recording starts.
8 Press ·P on the CD player.
The CD starts playing.
To Press
Stop recording p on the tape player
Pause recording P PAUSE
Stop CD play p on the CD player
Pause CD play ·P on the CD player
SYSTEM
POWER m ON
»
rP
p
0)
Æ
»
Æ
p
0)
P
»
p
p
5 1
DOLBY NR
34
2
To record
One side of the tape
Both sides*
Press DIRECTION
MODE to select
A
ß or RELAY
SYSTEM
POWER m ON
3
»
rP
p
0)
Æ
»
Æ
p
0)
P »
p
p
7 1 46
2
p
5
8
To record
One side of the tape
Both sides*
Press DIRECTION
MODE to select
A
ß or RELAY