Filter
Top Products
Chapter 3: the Radio
GB
11
Listening to the
Radio
When you want to play a radio
programme, you can have the tuner
automatically scan the radio frequencies
and tune in the stations with clear signals.
This feature saves you time in searching for
stations with clear signals. However,
stations with weak signals may be skipped
by automatic tuning. Manually tune in the
ones skipped by automatic tuning.
1 Press TUNER/BAND (or BAND on the
remote) repeatedly until the band you
want appears in the display.
As you press this button, the band
changes as follows:
German and Italian models
FM ˜ AM
Other models
FM n MW n LW
2 Press TUNING MODE repeatedly until
“AUTO” appears in the display.
3 Turn the JOG dial clockwise to scan a
higher frequency station. To tune in a
lower frequency station, turn the JOG
dial counter-clockwise.
The tuner starts scanning radio
frequencies, and stops automatically
when it finds a clear station.
“TUNED” appears in the display.
“STEREO” also appears if the tuned FM
station is broadcasting in stereo.
4 If you do not want to listen to the station
selected, turn the JOG dial again to
restart the scan.
If the tuner finds an RDS station
The frequency display changes to the
station name.
When the desired station is not
tuned in
Automatic tuning may skip stations with a
weak signals. Tune in the station manually.
1 Press TUNING MODE repeatedly until
“MANUAL” appears in the display.
2 Keep turning the JOG dial until the
desired station is tuned in.
To improve MW/LW/AM broadcast
reception
Reorient the supplied AM loop aerial for
MW/LW/AM.
When an FM programme is not clear to
receive
Press STEREO/MONO on the remote so
that “MONO” appears in the display. There
will be no stereo effect, but the reception
will improve. Press STEREO/MONO again
to restore the stereo effect.
One Touch Play feature
Press TUNER/BAND when the power is
off. You will be able to start listening to the
last received station without pressing any
other buttons.
Note
•When you listen to the sound source other
than tuner, you can select the tuner by
pressing TUNER/BAND (Automatic
Source Selection).
Chapter 3:
the
Radio
Listening to the Radio
Presetting Radio Stations
Playing Preset Radio
Stations
Tuning by Programme Type
(PTY)
SYSTEM
POWER m ON
3
1
2
9(p
0)
(
Pp
(
Pp
=+
0)
BAND
STEREO/MONO
n
VOLUME
TUNER
63 125 250 500 1k 2k 4k 8k 16k(Hz)
MHz
PRESET
DBFB
VOLUME
TUNER
63 125 250 500 1k 2k 4k 8k 16k(Hz)
MHz
DBFB
TUNED STEREO
AUTO
MW/LW/AM