Sony MHC-W55 Stereo System User Manual


 
Chapter 4: the Tape Player
GB
14
Playing a Tape
You can use TYPE I (normal), TYPE II
(CrO2) and TYPE IV (metal) tapes. When
you insert a tape, the deck detects the tape
type automatically.
1 Press § EJECT to open tape
compartment.
Insert a recorded tape in deck A or B
with the tape side facing down and the
side you want to play facing forward.
Push to close the compartment.
2 Press · (to play the front side) or ª
(to play the reverse side).
The tape starts playing.
* The deck stops automatically after
repeating the sequence five times.
** See “To play both decks in succession
(relay play)”.
To Press
Stop play p
Pause P PAUSE
Resume play after P PAUSE or ª or
pause ·
Fast forward ) for front side
0 for reverse side
Rewind 0 for front side
) for reverse side
Remove the cassette § EJECT
Using the remote
1 Press A-DECK or B-DECK to choose the
deck you want to control (a correspond-
ing message appears in the display).
2 Press the desired operation button.
To play both decks in succession
(relay play)
Relay play always follows the following
sequence. When the reverse side of the tape
in deck B finishes playing, the following
sequence continues four more times.
Deck A Deck A
(Front side) (Reverse side)
Deck B Deck B
(Reverse side) (Front side)
1 Press § EJECT and insert recorded tapes
in both decks.
2 Press DIRECTION MODE repeatedly
until “RELAY” appears in the display.
3 Press ª or · on either deck.
To stop relay play, press p.
To cancel relay play
Press DIRECTION MODE repeatedly until
A” or “ß” appears in the display.
When listening to a tape recorded with the
Dolby* B-type noise reduction system
Press DOLBY NR button so that “DOLBY
NR B” appears in the display.
The setting affects both decks. Dolby noise
reduction system reduces tape hiss noise in
low-level high-frequency signals.
* Dolby noise reduction manufactured
under license from Dolby Laboratories
Licensing Corporation.
“DOLBY” and the double-D symbol a
are trademarks of Dolby Laboratories
Licensing Corporation.
One Touch Play feature
Press · or ª when the power is off.
When a tape is in the player, you will
immediately be able to listen to the tape
without pressing any other buttons. If no
tape is inserted, the system will just turn on.
Chapter 4:
the Tape
Player
Playing a Tape
Recording a CD
Recording a CD: Selecting
Tape Length (tape select
edit)
Recording a CD: Specifying
Tape Length (time edit)
Recording a CD: Specifying
Track Order (programme
edit)
Recording From the Radio
Recording From Another
Tape (dubbing)
n
n
n
N
SYSTEM
POWER m ON
»
rP
p
0)
Æ
»
Æ
p
0)
P »
p
2
p
1
2
p
1
DOLBY NR
0/)0/)
DIRECTION MODE
»
rP
p
0)
Æ
»
Æ
p
0)
P »
p
To play
One side of the tape
Both sides*
Both decks in
succession**
Press DIRECTION
MODE to select
A
ß
RELAY