Filter
Top Products
10
GB
Positioning the speakers
(MHC-RV60 only)
1 Place the front speakers at an angle of
45 degrees from your listening
position.
2 Place the surround speakers facing
each other at about 60 to 90 cm above
your listening position.
1 Press ?/1 to turn on the system.
2 Press CLOCK/TIMER SET.
3 Press M or m repeatedly to set the hour.
4 Press ,.
5 Press M or m repeatedly to set the
minute.
6 Press ENTER.
The clock starts working.
To adjust the clock
1 Press CLOCK/TIMER SET.
2 Press M or m to select “CLOCK SET”, then
press ENTER.
3 Do the same procedures as step 3 to 6
above.
Notes
• The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
• You cannot set the clock in Power Saving Mode.
Front speaker (R)
Surround speaker (L) Surround speaker (R)
Front speaker (L)
Surround speaker
60 to 90 cm
Setting the clock