Filter
Top Products
MHC-GZR5D.GB.3-296-435-11(1)
66
GB
Folder and track generation rules
When rst transferring music to an USB
device, a “MUSIC” folder is created
directly below the “ROOT.” Folders and
tracks are generated within this “MUSIC”
folder as follows:
When transferring music from an
AUDIO CD
In stop mode
1)
:
Folder name: “FLDR001”
2)
Track name: “TRACK001”
2)
During playback:
Folder name: “REC1-CD”
3)
Track name: “TRACK001”
2)
When transferring music from a
DATA CD/DVD (MP3 audio tracks
only)
In stop mode
1)
:
Folder name: Same as the transferred
folder
4)
Track name: Same as the transferred
track
5)
During playback:
Folder name: “REC1-MP3”
3)
Track name: Same as the transferred
track
5)
1)
Except when resuming playback.
2)
Folder and tracks numbers are assigned
serially thereaer.
3)
A new track is created in the “REC1-CD” or
“REC1-MP3” folder each time a transfer is
performed.
4)
Up to 64 characters of the name are assigned.
5)
Up to 60 characters of the name are assigned.
Notes
Do not remove the USB device during
transfer or erase operations. Doing so may
corrupt the data on the USB device or
damage the USB device itself.
Do not connect the system and the USB
device through an USB hub.
When transferring music from an AUDIO
CD, the tracks are transferred as 128 kbps
MP3 audio tracks. When transferring music
from a DATA CD/DVD, MP3 audio tracks
are transferred with the same bit rate as the
original MP3 audio tracks.
CD text information is not transferred in the
created MP3 audio tracks.
Transferring stops automatically if:
the USB device runs out of space during
the transfer process.
the number of folders on the USB device
reaches the limit for the number that the
system can recognize.
Up to 150 audio tracks can be contained on
a single folder and up to 200 folders can be
contained on a single USB device.
e maximum number of audio tracks and
folders may vary depending on the audio
tracks and folder structure.
If the folder to be erased contains non-MP3/
WMA (Windows Media Audio)/AAC format
audio tracks or sub folders, these are not
erased.
If a folder or audio track that you are trying
to transfer already exists on the USB device
with the same name, a sequential number is
added aer the name without overwriting the
original folder or track.