Filter
Top Products
Tuner
61
GB
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset radio
station
— Preset Tuning
Before tuning to preset stations, be sure to preset
them first (see “Presetting radio stations” on
page 59).
1 Press FUNCTION +/– repeatedly to
select “TUNER FM” or “TUNER AM”
(or press TUNER/BAND on the unit
repeatedly to select “FM” or “AM”).
2 Press PRESET +/– repeatedly (or turn
PRESET +/– on the unit clockwise or
counterclockwise) to select the preset
station you want.
Listening to a non-preset
radio station
— Manual Tuning
1 Press FUNCTION +/– repeatedly to
select “TUNER FM” or “TUNER AM”
(or press TUNER/BAND on the unit
repeatedly to select “FM” or “AM”).
2 Press TUNING +/– repeatedly (or turn
TUNING +/– on the unit clockwise or
counterclockwise) to tune in the
station you want.
Tips
• When an FM stereo program has static noise, press
FM MODE repeatedly until “MONO” lights up in
the display. There will be no stereo effect, but the
reception will improve.
• To record the radio programs, see “Recording on a
tape manually” (page 64) or “Timer recording radio
programs” (page 78).
• To improve broadcast reception, adjust the supplied
antennas, or connect an external antenna.
• For Preset Tuning, you can use the numeric buttons
to select a preset station. Press numeric button(s) to
enter the preset number and then press ENTER.
Listening to the radio
FrequencyPreset number