Filter
Top Products
Disc – Various Functions
49
GB
Be sure to change the value in the Setup menu
when you move the speakers.
1)
When you perform QUICK SETUP (page 14), the
default settings are changed.
2)
The setting range changes depending on the front
speaker setting.
Notes
• When you adjust the speaker distance, the sound may
cut off for a moment.
• If each front and surround speakers are not placed at
an equal distance from your listening position, set the
distance according to the closest speaker.
• Do not place the surround speakers further away from
your listening position than the front speakers.
• Depending on the input stream, the “DISTANCE”
setting may not be effective.
x LEVEL (FRONT)
You can adjust the level of the front speakers,
center speaker and subwoofer as follows. Be
sure to set “TEST TONE” to “ON” for easy
adjustment. The items that are set to “NONE” in
“SIZE” cannot be selected.
Depending on the sub woofer, the sound output
may be smaller compared to other speakers
when you adjust the “SUBWOOFER” setting
during test tone.
FRONT
3.0 m
1)
Front speaker distance from the
listening position can be set in 0.2
meter increments from 1.0 to 7.0
meters.
CENTER
3.0 m
1)2)
Center speaker distance from the
listening position can be set in 0.2
meter increments from 0.0 to 7.0
meters.
SURROUND
3.0 m
1)2)
Surround speaker distance from the
listening position can be set in 0.2
meter increments from 0.0 to 7.0
meters.
L
0.0 dB
Set this between –6.0 dB and 0.0 dB
in 1.0 dB increments.
R
0.0 dB
Set this between –6.0 dB and 0.0 dB
in 1.0 dB increments.
CENTER
0.0 dB
Set this between –6.0 dB and
+6.0 dB in 1.0 dB increments.
SUBWOOFER
0.0 dB
Set this between –6.0 dB and
+6.0 dB in 1.0 dB increments
(FST-ZX100D/LBT-ZX100D/
MHC-GN1000D only).
Set this between –10.0 dB and
+10.0 dB in 1.0 dB increments
(FST-ZX80D/LBT-ZX80D only).
continued