Filter
Top Products
Getting Started
15
GB
7 Press ENTER.
The setting is selected and the “SPEAKER
SETUP” display appears on the TV screen.
8 Press V or v repeatedly to select the
front speaker distance from your
listening position, then press ENTER.
You can set from 1.0 to 7.0 meters.
Repeat this step to adjust the center and
surround speaker distance. For the center
and surround speaker distance, you can set
from 0.0 to 7.0 meters.
The setting is selected and “QUICK
SETUP is complete.” appears on the TV
screen.
To quit QUICK SETUP
Press DISPLAY.
To change the settings of QUICK
SETUP
1 Press DISPLAY when playback is
stopped.
The Control Menu appears on the TV
screen.
2 Press V or v repeatedly to select
(SETUP), then press ENTER.
3 Press V or v repeatedly to select “QUICK”,
then press ENTER.
The “LANGUAGE SETUP” display appears
on the TV screen.
4 Do the same procedures as steps 5 to 8 of
“Performing QUICK SETUP”.
Notes
• The guide message appears at the bottom of
the TV screen when you turn on the system
for the first time or after performing “RESET” (see
“To return the DVD setup to the default settings*,
perform reset as follows:” on page 84).
• If you do not want to perform QUICK SETUP, press
CLEAR in step 3. The guide message will disappear
from the TV screen.
• When there is a disc in the unit or the disc tray is
opened, the guide message does not appear on the TV
screen. To perform QUICK SETUP, press Z OPEN/
CLOSE on the unit to remove the disc and press
again to close the disc tray.
• If you want to change each setting individually, see
“Using the DVD setup menu” on page 43.
THEATRE SYNC allows you to turn on your
Sony TV and this system, changes the system’s
function to “DVD” and then switches the TV’s
input source you have set with just one button.
Preparing for the THEATRE
SYNC function
Register the TV’s input source connected to this
system.
Hold down SLEEP and press numeric
buttons, CLEAR or ALBUM +/– to select the
TV’s input source connected to this
system.
For details, refer to the following table.
The selected TV’s input source is memorized
into the remote.
SPEAKER SETUP
TEST TONE:
LEVEL(FRONT):
LEVEL(SURROUND):
OFF
CENTER:
3.0m
3.0m
SURROUND:
DISTANCE:
SIZE:
FRONT:
* 3.0m
Using the THEATRE SYNC
function
Hold down SLEEP
and press
To select the following
TV’s input source
0 No input source
(Default)
1VIDEO 1
2VIDEO 2
3VIDEO 3
4VIDEO 4
5VIDEO 5
6VIDEO 6
7VIDEO 7
8VIDEO 8
9 COMPONENT 1
CLEAR COMPONENT 2
ALBUM – COMPONENT 3
ALBUM + COMPONENT 4
continued