Filter
Top Products
48
GB
Press REC PAUSE/START, and then start
playing the recording source.
To stop recording
Press x.
Tips
• If you want to record from the reverse side, press
TAPE A/B to select deck B after step 1. Press
hH (or nN on the remote) to start playback
of the reverse side, then press x to start recording.
The TAPE B reverse indicator lights up.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• For recording from the radio:
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
4 Press CD SYNC. Press REC PAUSE/START.
Deck B stands by for recording.
“REC” flashes.
2 Press DVD.
Press a function button for the recording
source.
1 Load a recordable tape into deck B.
Notes
• You cannot listen to other sources while recording.
• CD Synchro Recording is not available with DVDs.
5 Press DIRECTION repeatedly to select g to record on one side. Select j
(or RELAY) to record on both sides.
6 Press REC PAUSE/START.
Recording starts.
Recording from a disc/tape/radio
manually
Recording to a tape
— CD Synchro Recording/Recording Manually/Program Edit
You can record from a disc (DVD, VIDEO CD, CD, MP3), tape, radio or other connected
component. You can use TYPE I (normal) tapes. The recording level is adjusted automatically.
Steps Recording from a disc (CD
Synchro Recording)
Load the disc or tape (or other audio
source), or tune in the station you want
to record.
3 Load the disc you want to record.