Filter
Top Products
16
GB
Inserting two R6 (size AA)
batteries into the remote
E
e
E
e
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
Setting the clock
1 Press ?/1 to turn on the system.
2 Press CLOCK/TIMER SET on the
remote.
3 Press M or m on the remote repeatedly
to set the hour.
4 Press , on the remote.
The minute indication flashes.
5 Press M or m on the remote repeatedly
to set the minute.
6 Press ENTER.
The clock starts working.
To adjust the clock
1 Press CLOCK/TIMER SET on the remote.
2 Press M or m on the remote repeatedly to
select “CLOCK SET”, then press ENTER.
3 Do the same procedures as step 3 to 6
above.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.