Filter
Top Products
DVD/VIDEO CD/CD/MP3
33
GB
x BALANCE
You can vary the balance of the left and right
speakers as follows. Be sure to set “TEST
TONE” to “ON” for easy adjustment.
The default settings are in parentheses.
•
FRONT (0 step): Adjust the balance between
the front left and right speakers (6 steps left
or right).
•
REAR (0 step)*: Adjust the balance between
the rear left and right speakers (6 steps left or
right).
* except for MHC-RV600D
x TEST TONE (except for MHC-RV600D)
The speakers will emit a test tone to adjust
“BALANCE” and “LEVEL”.
•
OFF: The test tone is not emitted from the
speakers.
•
ON: The test tone is emitted from each
speaker in sequence while adjusting balance
or level. When you select one of the
“SPEAKER SETUP” items, the test tone is
emitted from both left and right speakers
simultaneously.
Note
When you adjust the level of the sub woofer, set
T.TONE to “OFF”.
To adjust the volume of all the
speakers at once
Turn VOLUME (or press VOL +/– on the
remote).
Adjusting the speaker volume
and level
Use the remote for the operation.
For MHC-GX90D/RV800D/RV900D
1 Press DVD SETUP in stop mode.
2 Press M or m repeatedly to select
“SPEAKER SETUP”, then press
ENTER.
3 Press M or m repeatedly to select
“TEST TONE”, then press ENTER.
4 Press M or m repeatedly to select “ON”,
then press ENTER.
You will hear the test tone from each
speaker in sequence.
5 From your listening position, adjust the
value of “SIZE”, “DISTANCE”,
“BALANCE” and “LEVEL” using M/m/
</,.
The test tone is emitted from both left and
right speakers simultaneously.
6 Press ENTER when you finish
adjusting.
7 Press M or m repeatedly to select
“TEST TONE”, then press ENTER.
8 Press M or m repeatedly to select
“OFF”, then press ENTER.
continued