Filter
Top Products
17
Playing MDs
Locating a Particular Point in a
Track
You can also use 0 and ) to locate a particular
point in a track during playback or playback pause.
Playing Tracks Repeatedly
You can play tracks repeatedly in any play mode.
Press REPEAT.
“REPEAT” appears in the display.
The recorder repeats the tracks as follows:
When the MD is
played in
Normal play (page 8)
Shuffle Play (page 18)
Program Play (page 19)
The recorder repeats
All the tracks
All the tracks in random order
The same program
To cancel repeat play
Press REPEAT several times until “REPEAT” disappears.
The recorder returns to the original playing mode.
Repeating the current track
While the track you want to repeat is playing in normal
play, press REPEAT several times until “REPEAT 1”
appears in the display.
(Continued)
To locate a point Press
While monitoring the
sound
) (forward) or 0 (backward)
and keep pressing until you find
the desired point.
Quickly by observing
the display during
playback pause
(high speed search)
) or 0 and hold until you
find the desired point. There is no
sound output during this
operation.
When “OVER” appears during high speed search
If the disc reaches the end while you are pressing )
during playback pause, “OVER” appears in the display.
Press 0 (or press 0) or turn AMS (or press =)
counterclockwise to go back.
Notes
• If the disc reaches the end while you are pressing )
during sound monitoring, the recorder stops.
• Tracks that are only a few seconds long may be too short
to scan using the search function. For such tracks, it is
better to play the MD at normal speed.
r
6
)0
+=
pP·
0/)
REPEAT
REPEAT
)
A˜B
Playing MDs