Sony MDS-E58 MiniDisc Player User Manual


 
16
Playing MDs
You can check the track name at any time while
playing an MD Z
Press SCROLL on the remote.
Since the display shows up to 12 characters at a time,
press SCROLL again to see the rest of the track title if
the title has 13 characters or more.
Press SCROLL again to pause scrolling, and again to
continue scrolling.
Locating a Specific Track
You can quickly locate any track while playing a disc
by using AMS (Automatic Music Sensor), = and
+, number buttons or M.SCAN on the remote.
When you directly locate a track with a number over
25 Z
You must press >25 first, before entering the
corresponding digits.
Press >25 once if it is a 2-digit track number, and twice
if it is a 3-digit track number.
To enter “0,” press button 10.
Examples: To play track number 30
Press >25 once, then 3 and 10.
To play track number 100
Press >25 twice, then 1, 10 and 10.
You can change the playing time during music scan
1 While the recorder is stopped, press EDIT/NO to
display “Setup Menu.”
2 Turn AMS until “M. Scan” menu appears in the
display, then press AMS.
3 Turn AMS to select the length of the M.SCAN play
within the range of 6 to 20 seconds, using steps of
about one second, then press AMS.
4 Press EDIT/NO.
To pause playing at the beginning of a track
Turn AMS (or press = or +) after pausing
playback.
To go quickly to the beginning of the last track
Turn AMS counterclockwise (or press =) while the
display shows the total number of tracks and total disc
playing time, remaining recordable time of the disc, or
disc name (see page 15).
Do the following:
The next or
succeeding tracks
During playback, turn AMS clockwise
(or press + repeatedly) until you
find the desired track.
The current or
preceding tracks
During playback, turn AMS
counterclockwise (or press =
repeatedly) until you find the desired
track.
A specific track
directly
Press number buttons to enter the
track number.
A specific track by
using AMS
1 Turn AMS until the desired track
number appears while the recorder
is stopped. (The track number is
flashing.)
2 Press AMS or ·.
To locate
By scanning each
track (music scan)
1 Press M.SCAN before you start
playing.
2 When you find the desired track,
press · to start playing.
Playing MDs
Number
buttons
r
6
)0
+=
pP·
AMS ±
>25
·
=/+
M.SCAN