Filter
Top Products
Recording on MDs
14
Synchro-Recording With a Sony
CD Player
g
By connecting your recorder to a Sony CD player, you
can easily dub CDs onto MDs using the CD synchro
buttons on the remote. If your recorder is connected to
a Sony CD player by a digital input cable, track
numbers are automatically marked as on the original,
regardless of whether “LevelSync ON” or
“LevelSyncOFF” is selected. If your recorder is
connected to a Sony CD player by audio connecting
cords through LINE (ANALOG) IN, track numbers are
automatically marked when you select “LevelSync
ON” (see “Marking Track Numbers While Recording”
on page 12).
As the same remote controls both the CD player and
the recorder, you may have trouble operating both
units if they are far from each other. If you do, place
the CD player close to this recorder.
1 Turn on the CD player and the mixer.
2 Carry out Steps 2 to 5 in “Recording on an MD”
on page 6 to prepare the recorder for recording.
3 Insert a CD into the CD player.
4 Select the playback mode (Shuffle Play, Program
Play, etc.) on the CD player.
5 Press STANDBY.
The CD player pauses for playing and the
recorder pauses for recording.
6 Press START.
The recorder starts recording and the CD player
starts playback.
The track number and elapsed recording time of
the track appear in the display.
If the CD player does not start playing
Some CD player models may not respond when you
press START on the remote of the recorder. Press P on
the remote of the CD player instead.
7 Press STOP to stop synchro-recording.
To pause recording
Press STANDBY or CD PLAYER P.
To restart recording, press START or CD PLAYER P.
A new track number is marked each time you pause
recording.
You can use the remote of the CD player during
synchro-recording
When you press p, the CD player stops and the
recorder pauses for recording.
When you press P, the CD player pauses and the
recorder pauses for recording.
To restart synchro-recording, press ·.
You can change CDs during synchro-recording
Carry out the following steps instead of Step 7 above.
1 Press p on the remote of the CD player.
The recorder pauses for recording.
2 Change the CD.
3 Press · on the remote of the CD player.
Synchro-recording restarts.
You can also do synchro-recording with a Sony video
CD player
Using the procedure for synchro-recording with a Sony
CD player, you can do synchro-recording with a Sony
video CD player also.
To select the video CD player, press button number 2
while pressing down the POWER button before starting
the procedure.
To select the CD player again, press button number 1
while pressing down the POWER button.
The recorder is factory set to CD player for synchro-
recording.
You can check the remaining recordable time on the
MD
Press DISPLAY/CHAR (or DISPLAY) (see page 15).
r
6
)0
+=
+=
P
pP·
STANDBY
START
STOP
CD PLAYER P