41
t
Waking up to
music
— Daily Timer
You can wake up to music at a preset time
every day. Make sure you have set the clock
(see “Step 3: Setting the time” on page 9).
The 24-hour system model is used for
illustration purposes.
1 Prepare the music source you want
to play.
• CD: Insert a CD. To start from a
specific track, create a program (see
“Programming CD tracks” on page
23).
• Tape: Insert a tape with the side you
want to play facing forward.
• Radio: Tune in a preset station (see
“Step 4: Presetting radio stations” on
page 10).
2 Turn VOLUME to adjust the
volume.
3 4,5,6,7,8
DAILY
2
9
3 Press c/CLOCK SET.
“SET” appears and “DAILY” flashes in
the display.
4 Press TUNING +/– to select
“DAILY,” then press ENTER/
NEXT.
“ON” appears and the hour indication
flashes in the display.
5 Set the time to start playback.
Press TUNING +/– to set the hour, then
press ENTER/NEXT.
The minute indication flashes.
Press TUNING +/– to set the minutes,
then press ENTER/NEXT.
The hour indication flashes again.
6 Set the time to stop playback
following the above procedure.
7 Press TUNING +/– until the desired
music source appears.
The indication changes as follows:
TUNER t CD PLAY t TAPE PLAY
8 Press ENTER/NEXT.
The start time, the stop time, and the
music source appear in turn before the
original display returns.
9 Turn off the system.
continued
DAILY
DOLBY NR
VOLUME
ALL DISCS
OFF
DAILY
DOLBY NR
VOLUME
ALL DISCS
OFF