Filter
Top Products
18
Tips
•When you want to record on the reverse side,
press h after pressing z REC in step 5 so that the
indicator on the h button (for the reverse side)
lights up green .
•When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
•To record non-preset stations, select “MANUAL”
in step 2, then press TUNING +/– to tune in the
desired station.
•When you want to reduce the hiss noise in low-
level, high-frequency signals, press DOLBY NR
before step 7 so that “DOLBY NR B” appears in
the display.
•To record with the surround effect, press DSP
so that “SUR
” appears in the display.
The equalizer settings will not be recorded.
•To improve broadcast reception, move the
supplied antennas.
Playing a tape
You can play any type of tape, TYPE I
(normal), TYPE II (CrO2), or TYPE IV (metal).
The deck automatically detects the tape type.
You can also use the AMS* functions to
quickly locate the desired songs.
To select either deck A or B, press DECK A
hH or DECK B hH on the remote.
* AMS: Automatic Music Sensor
1
2
3
x
m/
M
VOLUME
DOLBY
NR
x
?/1
(Power)
3
X
DECK A hH
DECK B hH
VOL +/–
m/
M
AMS ./>
Recording from the radio
(continued)
m/M
x