Filter
Top Products
24
DOLBY NR
VOLUME
PROGRAM
OFF
1 Place CDs and close the front cover.
2 Press FUNCTION repeatedly until
“CD” appears in the display.
3 Press PLAY MODE repeatedly until
“PROGRAM” appears in the
display.
4 Press DISC SKIP (or D.SKIP on the
remote) to select a CD.
5 Turn the jog dial until the desired
track appears in the display.
6 Press PLAY MODE once.
The track is programmed. First “STEP”
and the programmed playing order
appear, then the total playing time
appears.
7 Repeat steps 4 through 6 to program
additional tracks.
Skip step 4 to select tracks from the same
disc.
8 Press HX.
All the tracks play in the order you
selected.
Disc number
Total playing timeTrack number
To cancel Program Play
Press PLAY MODE repeatedly until
“PROGRAM,” “ALL DISCS SHUFFLE,” or
“1 DISC SHUFFLE” disappears from the
display.
To
Check the program
Clear the last selected
track
Clear a specific track
Add a track to the
program
Clear the entire
program
Tips
•The program you created remains in the CD
player’s memory even after it has been played.
Press HX to play the same program again.
• If “--.--” appears instead of the total playing time
while programming, this means:
– you have programmed a track numbered over
20, or
– the total playing time has exceeded 100 minutes.
Programming CD tracks
(continued)
Press
CHECK on the remote
repeatedly. After the
last track, “CHECK
END” appears.
CLEAR on the remote
in stop mode.
CHECK on the remote
repeatedly until the
number of the track to
be cleared lights up,
then press CLEAR.
1 Press DISC SKIP (or
D.SKIP on the remote)
to select a CD.
2 Turn the jog dial to
select a track.
3 Press PLAY MODE.
x once in stop mode or
twice while playing.
DOLBY NR
VOLUME
PROGRAM
OFF
The last
programmed track Total playing time