Filter
Top Products
20
Recording from a
tape
— High-speed Dubbing
You can use TYPE I (normal) or TYPE II
(CrO2) tapes. The recording level is
automatically adjusted.
1 Press A EJECT Z and Z B EJECT
and insert a recorded tape in deck A
and a recordable tape in deck B.
2 Press H SPEED DUB.
Deck B stands by for recording.
1234
x
With the side you want to
play/record on facing forward
?/1
(Power)
x
3 Press DIRECTION repeatedly until
g appears to record on one side or
j (or RELAY) to record on both
sides.
4 Press X.
Dubbing starts.
When dubbing ends, decks A and B
automatically stop.
To stop dubbing
Press x on deck A or B.
Tips
•When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
•You don’t have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
Notes
•If you set DIRECTION to j, when the tapes you
use have different lengths, the tape in each deck
reverses independently. If you select RELAY, the
tapes in both decks reverse together.
•You cannot record the surround effect.