Filter
Top Products
MHC-GZR33Di/LBT-LCD7Di.GB.4-143-233-11(1)
85
GB
USB Device
Continued
To specify the slide show speed
(JPEG image les only)
1
Press DISPLAY repeatedly until the
Control Menu for JPEG image les
appears on the TV screen.
2
Press
or
repeatedly to select
(INTERVAL), then press ENTER.
e options for “INTERVAL” appear
on the TV screen.
3
Press
or
repeatedly to select the
desired transition interval.
e default setting is underlined.
NORMAL: Sets to the standard
duration.
F
AST: Sets the duration shorter
than “NORMAL.”
S
LOW 1: Sets the duration longer
than “NORMAL.”
S
LOW 2: Sets the duration longer
than “SLOW 1.”
4
Press ENTER.
e selected setting takes eect.
Note
Some JPEG image les (especially progressive
JPEG image les or JPEG image les with
3,000,000 pixels or more) may take a longer
time to display than others, which may make
the transitions seem longer than that of the
option you selected.
To select a transition eect for image
les in the slide show
(JPEG image les only)
1
Press DISPLAY repeatedly until the
Control Menu for JPEG image les
appears on the TV screen.
2
Press
or
repeatedly to select
(EFFECT), then press ENTER.
e options for “EFFECT” appear on
the TV screen.
3
Press
or
repeatedly to select the
desired setting.
e default setting is underlined.
MODE 1: e image sweeps in
from top to bottom of the screen.
M
ODE 2: e image sweeps in
from le to right of the screen.
M
ODE 3: e image stretches out
from the center of the screen.
M
ODE 4: e image randomly
cycles through the eects.
M
ODE 5: e next image slides
over the current image.
O
FF: Turns o this function.
4
Press ENTER.
e selected setting takes eect.