Sony HCD-GZR33D Stereo System User Manual


 
MHC-GZR33Di/LBT-LCD7Di.GB.4-143-233-11(1)
31
GB
Getting Started
When using a TV
Turn on the TV and select the video
input so that you can view the pictures
from this system.
Operating a Sony TV
You can use the following buttons to
operate a Sony TV. ese buttons have
been marked in yellow.
To Press
Turn the TV on
or o
TV / while
holding down TV.
Switch the TV’s
input source
between the TV
and other input
sources
TV INPUT while
holding down TV.
Select the TV
channels
TV CH +/ or
numeric buttons*
while holding down
TV.
Adjust the
volume of the TV
speaker(s)
TV VOL +/ while
holding down TV.
* For double digit number, hold down TV
and press -/-- , then press the number. (For
example, hold down TV, press -/-- , then 2
and 5 for entering 25.)
Setting the LCD
You can make adjustments to pictures
displayed in the LCD.
Use buttons on the unit and conrm
operations in the LCD, for the following
settings.
Note
Playback settings stored in the disc take
priority over the LCD settings. erefore, some
of the LCD settings may not be performed.
1
Press OPTIONS on the unit
repeatedly until “PICTURE
MODE” or “WIDE MODE” appears
in the LCD.
2
Press
or
repeatedly to select
the desired setting, then press
ENTER.
Continued