Filter
Top Products
MHC-GZR33Di/LBT-LCD7Di.GB.4-143-233-11(1)
117
GB
Additional Information
e WMA le stored in WMA DRM/
WMA Lossless/WMA PRO format
cannot be played back.
e AAC le stored in copyright-
protected AAC or AAC Lossless format
cannot be played back.
AA
C les encoded at a sampling
frequency of 96 kHz cannot be played
back.
I
f you use a partitioned USB device,
only audio les on the rst partition
can be played.
e system can play back to a depth of
8 folders only.
e number of folders has exceeded
200.
e number of les has exceeded 150.
F
iles that are encrypted or protected by
passwords, etc. cannot be played back.
* is system supports FAT12, FAT16 and
FAT32, but some USB devices may not
support all of these FAT. For details, see the
operating instructions of each USB device or
contact the manufacturer.
Picture
There is no picture.
e “VIDEO/SAT” function is
selected, but there is no input signal.
C
heck that the system is connected
securely.
e video cord is damaged. Replace it
with a new one.
M
ake sure you connect the unit to the
video input jack of your TV (page 104).
M
ake sure you turn on the TV and
operate the TV correctly.
M
ake sure you select the video input
on the TV so that you can view the
pictures from the system.
M
ake sure you set the color system
correctly, according to your TV’s color
system (Australian model only).
M
ake sure you connect the unit and
your TV using only the supplied video
cord.
S
et “PROGRESSIVE (COMPONENT
OUT)” to “OFF” if you connect your
TV to the COMPONENT VIDEO
OUT jacks and your TV cannot accept
progressive signal.
Y
ou have set to progressive format
but your TV cannot accept the signal
in progressive format. In this case,
connect the VIDEO OUT jack to the
TV and set to the Interlace format
(page 28).
Continued