Sony HCD-GZR33D Stereo System User Manual


 
MHC-GZR33Di/LBT-LCD7Di.GB.4-143-233-11(1)
30
GB
7
Press or repeatedly to select
the desired setting, then press
ENTER.
e default setting is underlined.
OFF: Outputs interlace signals.
Select this setting when:
your TV does not accept
progressive signals.
your TV is connected to jacks
other than the COMPONENT
VIDEO OUT jacks.
O
N: Outputs progressive signals.
Select this setting when:
your TV accepts progressive
signals.
your TV is connected to the
COMPONENT VIDEO OUT
jacks.
When you select “ON,” the
conrmation display appears. Follow
the steps below.
8
Press or repeatedly to select
“START,” then press ENTER.
e system outputs the progressive
signal for 5 seconds. Check that the
screen is displayed correctly.
9
Press or repeatedly to select
“YES.”
e system outputs the progressive
signal. When you select “NO,”
the system does not output the
progressive signal.
Note
ere would be no image on your TV or the
image is not clear if your setting does not
match your TV or connection.