Sony DH840 Stereo Receiver User Manual


 
41
GB
D:\NORM'S JOB\SONY HA\SO0190\STR-DH730_DH830_PMRF
01\4408151112_GB\GB04GET_STR-DH730-CEL.fm
masterpage: Right
STR-DH830/STR-DH730
4-408-151-11(2)
Basic Operations
Tips
You can turn INPUT SELECTOR on the receiver
or press input buttons on the remote control to
select the equipment you want.
You can adjust the volume differently depending
on the speed you turn the MASTER VOLUME on
the receiver.
To turn the volume up or down quickly: turn the
knob quickly.
To make fine adjustment: turn the knob slowly.
You can adjust the volume differently depending
on the length of time you press and hold the
MASTER VOL +/– or
2 +/– on the remote
control.
To turn the volume up or down quickly: press and
hold the button.
To make a fine adjustment: press the button and
release it immediately.
To activate the muting function
Press MUTING or .
The muting function will be canceled when
you do the following.
Press MUTING or again.
Increase the volume.
Turn off the receiver.
Perform Auto Calibration.
To avoid damaging your
speakers
Before you turn off the receiver, be sure to turn
down the volume level.
You can enter a name of up to 8 characters for
inputs and display it.
It is more recognizable having the equipment
named on the display than the jacks.
1 Select the input you want to
name from “
Input” screen.
2 Press TOOLS/OPTIONS.
The option menu appears.
3 Select “Name Input”, then
press or b.
4 Press V/v repeatedly to select a
character, then press b.
You can move the input position
backward and forward by pressing B/b.
5 Repeat step 4 to input a
character one by one, then
press .
The name you entered is registered.
Note
Some letters that can be displayed on the TV screen
cannot be displayed on the display panel.
Naming the input (Name Input)