Filter
Top Products
PREPARATION
11
Connections
Make one of the following connections, depending on
the capabilities of your existing equipment.
Tips
Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the
DVD Receiver
. Use one of the connec-
tions described below.
Please refer to the manuals of your TV, VCR or other
devices as necessary to make the best connections.
–
Make sure the DVD Receiver is connected directly to
the TV. Select the correct AV input on your TV.
– Do not connect your
DVD Receiver
to TV via your
VCR. The DVD image could be distorted by the copy
protection system.
Video connection
Connect the MONITOR OUT jack on the DVD Receiver
to the video in jack on the TV using the video cable
supplied (V).
SCART connection
Connect the EURO AV OUTPUT (TO TV) jack on the
DVD Receiver to the SCART IN jack on the TV using
the Scart cable (S).
Note
When you connect the
DVD Receiver
to your TV, be
sure to turn off the power and unplug both units from
the wall outlet before making any connections.
Connecting to a TV
Rear of DVD Receiver
R
L
AUDIO INPUT
VIDEO
INPUT
S-VIDEO
INPUT
Rear of TV
V
SCART INPUT
S
(not supplied) (not supplied)