Filter
Top Products
Other Operations
59
GB
Presetting Radio Stations
You can preset 20 FM stations, and 10 AM
stations. Before tuning, make sure to turn down
the volume to minimum.
1 Press TUNER/BAND repeatedly until
the band you want appears in the front
panel display.
Each time you press TUNER/BAND, the
band toggles between FM and AM.
2 Press and hold TUNING + or – until the
auto scanning starts.
Scanning stops when the system tunes in a
station. “TUNED” and “ST” (for stereo
program) appear in the front panel display.
3 Press TUNER MENU.
4 Press C/c or X/x repeatedly until
“MEMORY” appears in the front panel
display.
5 Press ENTER.
A preset number appears in the front panel
display.
6 Press X/x to select the preset number
you want.
7 Press ENTER.
The station is stored.
8 Repeat 1 to 7 to store other stations.
To change the preset number
Restart from step 1.
To change the AM tuning interval
(except for Austlarian and Middle
Eastern model)
The AM tuning interval can be set to either
9 kHz (default) or 10 kHz (for some areas).
To change the AM tuning interval, first tune in
any AM station, then turn off the system by
pressing "/1 on the remote, or press "/1 on the
system. While holding down VOLUME – (on
the system), press "/1 on the system to turn on
the power. If you change the interval, AM preset
stations will be erased.
To reset the interval, repeat the same procedure.
Enjoying the Radio
123
45
8
0
6
7
10
9
TUNER
MENU
"/1
TUNER/
BAND
TUNING –/+
ENTER
C/X/x/c
FUNCTION
m
continued