Filter
Top Products
Other Operations
55
GB
You can control your TV (SONY only) with the
supplied remote.
Controlling TVs with the
remote
Controlling the TV
You can control your TV using the buttons
below.
Using the number buttons for controlling
the TV
When you set the remote to the TV mode, you
can use the number buttons for controlling the
TV.
Press the TV button.
The TV button turns red and the remote is set to
the TV mode. You can select the TV channels by
using the number buttons.
>10 is for selecting a channel number greater
than 10.
To cancel the TV mode, press the TV button
again.
Notes
• The TV button turns off when you do not operate the
remote for 10 seconds.
• Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
Tip
Depending on the TV manufacturer, the following
method also works. Press >10, then the number. (For
example, for channel 25, press >10, then 2 and 5.)
Changing the type of signal
output
This will change the type of signal output from
the COMPONENT VIDEO OUT jacks on the
system. See page 73 for more information about
the different signal types.
1 Press FUNCTION repeatedly to select
“DVD.”
Other Operations
Controlling the TV with the
Supplied Remote
By pressing You can
TV [/1 Turn the TV on or off.
TV/VIDEO Switch the TV’s input source
between the TV and other input
sources.
TV VOL +/– Adjust the TV volume.
TV CH +/– Select the TV channel.
123
45
8
0
6
7
10
9
TV VOL –/+
TV/VIDEO
Number
buttons
TV CH +/–
TV ?/1
ENTER
TV
123
45
8
0
6
7
10
9
PROGRESSIVE
FUNCTION
continued