Filter
Top Products
26
GB
x SP SETUP
If you do not connect center or surround
speakers, or move the surround speakers, set the
parameters for CENTER and SURROUND.
* Only for North American models.
Notes
• In SP SETUP, the North American model’s OSD
displays both metric and imperial measurements. The
other model displays metric measurements only. The
manual shows both.
• When you set the distance, the sound cuts off for a
moment.
• If all front and surround speakers are not placed at an
equal distance from your listening position, set the
distance according to the closest speaker.
• Do not place the surround speakers farther away from
your listening position than the front speakers.
• Depending on the settings of other speakers, the
subwoofer may output excessive sound.
x LEVEL
The speakers will emit a test tone to adjust
“LEVEL” items.
You can vary the balance of the left and right
speakers as follows. Be sure to set “T.TONE” to
“T.TONE ON” for easy adjustment.
You can vary the level of each speaker as
follows. Be sure to set “T.TONE” to “T.TONE
ON” for easy adjustment.
CENTER SP
(center
speaker)
CENTER Y: Select this if you use a
center speaker.
CENTER N: Select this if no center
speaker is used.
SURR SP
(surround
speaker)
SURR Y: Select this if you use
surround speakers.
SURR N: Select this if no surround
speaker is used.
F DIST
(front
distance)
F D 3.0 M
F D 10F*
Front speaker distance from the
listening position can be set in
0.2 metre (1 ft) increments from
1.0 to 7.0 metres (3 to 23 ft).
CEN DIST
(center
distance)
C D 3.0 M
C D 10F*
Center speaker distance can be set up
to 1.6 metres (5 ft) forward closer to
the listening position, in 0.2 metre
(1 ft) increments.
SURR DIST
(surround
distance)
S D 3.0 M
S D 10F*
Surround speaker distance can be set
up to 4.6 metres (15 ft) closer to your
listening position from the front
speaker position, in 0.2 metre (1 ft)
increments.
T.TONE
(test tone)
T.TONE OFF: The test tone is not
emitted from the speakers.
T.TONE ON: The test tone is
emitted from both left and right
speakers simultaneously while
adjusting balance. When you select
one of the “LEVEL” items, the test
tone is emitted from each speaker in
sequence.
F BALANCE
(front
balance)
F BAL 0
Adjusts the balance between the
front left and right speakers. (You
can adjust from the center 6 steps left
(F BAL L6) or right (F BAL R6).)
CEN LEVEL
(center level)
Adjusts the level of the center
speaker (–6 dB to +6 dB, 1 dB
increments).
SL LEVEL
(surround left
level)
Adjusts the left level of the surround
speakers (–6 dB to +6 dB, 1 dB
increments).
SR LEVEL
(surround
right level)
Adjusts the right level of the
surround speakers (–6 dB to +6 dB,
1 dB increments).
SW LEVEL
(subwoofer
level)
Adjusts the level of subwoofer
(–6 dB to +6 dB, 1 dB increments).