Filter
Top Products
20
GB
Required cords
Video cord for connecting a TV
Audio cords (not supplied)
When connecting a cord, be sure to match the colour-coded sleeves to the appropriate jacks on the
components.
Terminals for connecting video and audio components
Notes
•When the system is set to “DVD” mode, the signal is output from the S VIDEO OUT jack or COMPONENT VIDEO
OUT jacks.
•When the system is set to “DVD,” and progressive format is selected, the signal is output only from the
COMPONENT VIDEO OUT jacks.
•When you connect a VCR or digital satellite receiver to the VIDEO/SAT jacks of this system, change the function
to VIDEO (page 57).
Tips
•When using the S video jack instead of the video jack, your TV monitor must also be connected via an S video jack.
S video signals are on a separate bus from the video signals and will not be output through the video jacks.
•When using the COMPONENT VIDEO OUT jacks (Y, P
B/CB, PR/CR) instead of the video jacks, your TV monitor
must also be connected via COMPONENT VIDEO OUT jacks (Y, P
B/CB, PR/CR). If your TV accepts progressive
format signals, use this connection and set to progressive format (page 55).
Step 3: TV and Audio Component Hookups
Connect the To the
TV MONITOR OUT jacks
VCR/Digital satellite receiver VIDEO/SAT jacks
White (L/audio)
Red
(
R/audio
)