Sony CMT-CP500MD CD Player User Manual


 
43
Sound Adjustment/Timer
8 Press @/1 to turn off the system.
Do this
Press CLOCK/TIMER
SELECT on the remote and
press . or > on the
remote repeatedly until “MD
REC?” or “TAPE REC?”
appears in the display, then
press ENTER/YES on the
remote.
Start over from step 1.
Press CLOCK/TIMER
SELECT on the remote and
press . or > on the
remote repeatedly until
“TIMER OFF?” appears in the
display, then press ENTER/
YES on the remote.
To
Check the settings/
activate the timer
Change the setting
Turn off the timer
Tip
When you record from the radio, the station name
(see page 36, or frequency when the station is not
labeled), the start time and the stop time are
automatically recorded on the MD.
Notes
The system will turn on 30 seconds before the
specified starting time.
If the system is turned on at the specified starting
time, recording will not occur. Do not operate the
system from the time the system turns on until the
recording starts. Otherwise the timer will not be
activated correctly.
When you record on a brand-new MD, the first 15
seconds are not recorded.
If the system is on about 30 seconds before the
preset time, the timer-recording will not be
activated.
The volume is reduced to minimum during
recording.
Optional Components
Hooking up the optional
components
You can connect a variety of components to
your system in order to enhance it. Make sure
that the color of the plugs matches that of the
connectors. You can also connect a personal
computer to the PC LINK connector and
operate the system from the personal computer.
PC LINK
* If the jack is covered with a cap, remove it before
use.
To the audio output
jacks on your
record player/VCR
To the optical digital
output jack of a
digital component*
Do This
Press FUNCTION repeatedly
until “OPTICAL IN” appears
in the display.
Press FUNCTION repeatedly
until “ANALOG IN” appears
in the display.
Connect the personal computer
to the PC LINK connector
using a Sony PC connection kit
(option) that supports this
system.
Optional Components
To
Listen to the
connected digital
component
Listen to the
connected record
player/VCR
Operate the system
from a personal
computer