Filter
Top Products
39
Tape — Play
4 Press ENTER/START.
The tape deck stands by for recording and
the MD deck pauses for play.
When you want to record on the reverse
side, press TAPE nN so that “n”
appears in the display.
5 Press PLAY MODE DIRECTION
repeatedly until appears to record on
one side or (or ) to record on
both sides.
6 Verify that “Press START” flashes in
the display. Then press ENTER/START.
MD playing and tape recording start.
To stop recording
Press MD x or TAPE x.
Note
If the tape becomes full during recording, the MD
deck and the tape deck stop automatically.
Tips
• You can record only your favorite MD tracks with
MD Program Play. After step 2, follow the same
procedures as from step 1 to 5 in MD Program Play
(see page 14). Then go to step 3.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• If you select both sides recording and the tape
reaches the end of the front side part-way through a
track, the entire track is recorded again from the
beginning of the reverse side.
Tape — Recording
Recording on a tape
manually
— Manual Recording
With manual recording, you can record just the
portions you like from a CD or an MD on a
tape. You can also record a radio program.
You can use Type I (normal) tape.
1 Load a recordable tape.
2 Press FUNCTION repeatedly to select
the desired source to record.
3 Press TAPE REC z.
The tape deck stands by for recording.
When you want to record on the reverse
side, press TAPE nN so that “n”
appears in the display.
4 Press PLAY MODE DIRECTION
repeatedly until appears to record on
one side or (or ) to record on
both sides.
5 Press TAPE X and then start playing
the desired source to record.
To stop recording
Press TAPE x.
Tips
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• If you select both sides recording and the tape
reaches the end of the front side part-way through a
track, the entire track is recorded again from the
beginning of the reverse side.