Sony CMT-CP500MD CD Player User Manual


 
41
Sound Adjustment/Timer
Waking up to music
— Daily Timer
By setting the Daily Timer, you can make the
system automatically turn on and off at
specified times. To use this function, make
sure that you have set the system clock
correctly (see “Setting the time” on page 7).
1 Prepare the music source you want to
listen to when the system turns on.
• CD: Load a CD. To start playing from a
specific track, make a program (see
“Programming the CD tracks” on page
10).
• MD: Load an MD. To start from a
specific track, make a program (see
“Programming the MD tracks” on page
14).
• Tape: Load a tape with the side you want
to play facing towards you.
• Radio: Tune in the preset radio station
that you want (see “Listening to the radio”
on page 35).
2 Adjust the volume.
3 Press CLOCK/TIMER SET on the
remote.
“DAILY SET” and “c DAILY” appears in
the display.
4 Press ENTER/YES on the remote.
“ON” appears, then the hour indication
flashes.
5 Set the starting time.
Press . or > on the remote repeatedly
to set the hour, then press ENTER/YES on
the remote.
The minute indication begins flashing next.
Press . or > on the remote repeatedly
to set the minute, then press ENTER/YES
on the remote.
“OFF” appears, then the hour indication
flashes again.
6 Set the stopping time by repeating step
5.
7 Press . or > on the remote
repeatedly until the music source you
want appears.
The display changes as follows:
t TUNER y CD PLAY T
t TAPE PLAY y MD PLAY T
8 Press ENTER/YES on the remote.
The starting time, the stopping time, and the
music source appear in turn, then the
original display returns.
9 Press @/1 to turn off the system.
continued