Filter
Top Products
11
CD
Using the CD display
Press DISPLAY on the remote repeatedly.
When a CD TEXT disc is loaded, you can
check the information recorded on the disc,
such as the titles.
The display changes as follows:
During normal playback
Current track number and elapsed playing time
of the track t Current track number and
remaining playing time of the track t
Remaining playing time of the entire CD t
Track title of the current track* t Clock
display t BASS level t TREBLE level t
Current track number and elapsed playing time
of the track t …
While the CD is stopped
Total number of tracks and total playing time
t CD disc title* t Clock display t BASS
level t TREBLE level t Total number of
tracks and total playing time t …
* If a CD that has no title is loaded, nothing appears.
When the CD contains 21 tracks or more, CD
TEXT is not displayed from track 21 on.
Labeling a CD
— Disc Memo
You can label up to 50 CDs with titles of up to
20 symbols and characters. Whenever you load
a labeled CD, the title appears in the display.
Notes
• You cannot label a CD for which “TEXT” appears
in the display.
• When labeling CDs for the first time, be
sure to first erase all disc titles using the
procedure “Erasing a disc title” on page 12.
1 Press CD on the remote to switch the
function to CD.
If “SHUFFLE” or “PGM” appears in the
display, press PLAY MODE DIRECTION
(or PLAY MODE on the remote) repeatedly
until both disappear.
2 Press NAME EDIT/SELECT on the
remote.
The cursor starts flashing.
3 Press NAME EDIT/SELECT on the
remote repeatedly to select the desired
type of character.
The display changes as follows:
Selected AB* (Upper cases) t Selected
ab* (Lower cases) t Selected 12
(Numbers) t Selected AB* (Upper cases)
t …
* Press number 1 repeatedly to display the
following symbols.
’ – / , . ( ) : ! ?
In addition, when the symbols above appear in
the display, press . or > on the remote
repeatedly to display the following symbols.
& + < > _ = ” ; # $ % @
`
continued