Filter
Top Products
31
MD — Editing
4 Press . or > on the remote
repeatedly until the first track number
of the two to be combined appears,
then press ENTER/YES on the remote.
For example, to combine tracks 4 and 1,
select 4.
5 Press . or > on the remote
repeatedly until the second track
number of the two to be combined
appears.
6 Press ENTER/YES on the remote.
“Complete !” appears.
Notes
• Tracks recorded in different recording modes
(stereo, LP2, LP4 or MONO) cannot be combined.
• If both of the combined tracks have track titles, the
title of the second track is erased.
Undoing the last edit
— Undo Function
You can use this function to cancel the last edit
and restore the contents of the MD to the
condition before the edit.
Note, however, that you cannot undo an edit if
you do any of the following after the edit:
• Do another edit.
• Press the MD REC z or ENTER/START
button.
• Update the TOC by turning off the system or
ejecting the MD.
• Disconnect the power cord.
1 Press MENU/NO on the remote in stop
mode to display “Edit Menu.”
2 Press . or > on the remote
repeatedly until “Undo ?” appears in
the display.
“Undo ?” does not appear, when there is no
editing function that can be canceled.
3 Press ENTER/YES on the remote.
A message appears, depending on the last
edit.
4 Press ENTER/YES on the remote again.
“Complete !” appears.
Second track number
to be combined
New track
number