Filter
Top Products
43
Tuner
Listening to the radio
— Preset Tuning
Presetting radio stations in the system’s
memory in advance make it easy to tune in
those stations later (see “Presetting radio
stations” on page 42).
1 Press FUNCTION (or TUNER BAND on
the remote) repeatedly to select FM or
AM.
2 Press TUNING MODE on the remote
repeatedly until “PRESET” appears in
the display.
3 Press TUNING + or – repeatedly to
select the desired station .
The preset number and the frequency (or
station name*
1
or RDS station name*
2
)
appear.
*
1
The station name appears only if you have
labeled the station (see page 44).
*
2
European model only
To turn off the radio
Press ?/1.
To enter preset number over 10
(on the remote only)
1 Press >10.
2 Enter the corresponding digits.
To enter 0, press 10/0 instead.
Example:
To enter preset number 20, press >10, then 2 and
10/0.
To tune in a non-preset radio station
• In step 2, press TUNING MODE on the
remote repeatedly until “MANUAL” appears
in the display, and then press TUNING + or
– repeatedly to tune in the desired station
(Manual Tuning).
• In step 2, press TUNING MODE on the
remote repeatedly until “AUTO” appears in
the display, and then press TUNING + or
–. The frequency indication changes and the
scanning stops when the system tunes in a
station (Automatic Tuning).
To cancel Automatic Tuning
Press TUNING MODE on the remote.
Tips
• If there is static during an FM broadcast, press FM
MODE on the remote repeatedly until “MONO”
appears in the display. The broadcast will no longer
be in stereo, but the reception will improve.
• To improve the reception, adjust the supplied
antennas or connect an external antenna.