Filter
Top Products
16
CDP-CE575
This set has the Aging mode for operation check of the mechanism deck.
• If a failure occurred
The aging operation stops and a faulty status is displayed on the fluorescent indicator tube.
• If no failure occurs
The aging operation continues repeatedly.
Note: Do not use the test disc when performing aging.
Aging will not be performed properly if discs with tracks shorter than 4 seconds are used.
Procedure:
1. Press the [POWER] button and turn ON the power.
2. Set discs on all trays.
(More than two discs if five are not available)
3. All mode:
Press the
[CHECK], [CONTINUE] and x buttons at the same time.
Disc table mode:
Press the [CHECK], [CONTINUE] and [DISC SKIP] buttons at the same time.
Loading mode:
Press the [CHECK], [CONTINUE] and [EX-CHANGE] buttons at the same time.
4. Aging starts, and the fluorescent indicator tube will display as follows.
(a) A : All mode
AD : Disc table mode
AL : Loading mode
NG : failure occurred
(b) Code No.
(c) Aging count (000001 to 999999)
5. To exit the mode, press the [POWER] button to turn OFF the power.
AGING MODE
For the aging mode, three modes of all mode, disc table mode, and loading mode are available.
Code No. Status All mode
Disc table Loading
mode mode
0 CLOSE (Tray close) a a
1 TOC read aaa
2 Access to last track a
3 Play of last track (2 sec) a
4 EX OPEN (Tray open while chucking) a a
5 EX SKIP (Disc tray rotate) a
6 EX CLOSE (Tray close) a a
7 Access to first track a
8 Play of first track (2 sec) a
9 OPEN (tray open) a a
A
DISC SKIP (Disc tray rotate,
aa
and change next disc)
The discs are selected in the order of DISC 1 → DISC 2 → DISC 3 → DISC 4 → DISC 5 → DISC 1....Empty trays are skipped.
But the order is random in the disc table mode.
display
(a) (b) (c)