Filter
Top Products
CDP-CE575
10
3
three screws
(BVTP3
×
8)
2
three screws
(BVTP3
×
8)
7
wire (flat type) (21 core)
(CN301)
8
connector
(CN311)
5
screw
(BVTP3
×
8)
4
Slide the tray until the screw
that fixes the table assy can be
seen through around hole
in the table assy.
1
Insert a tapering driver from the bottom of the chassis,
and turn it in the direction of the arrow until the base unit
goes down to the lowest position.
6
9
CD mechanism deck
(CDM59-5BD27)
a
a
3-4. CD MECHANISM DECK (CDM59-5BD27)
3-5. MAIN BOARD
3 two screws
(PTTWH3 × 6)
2 two screws
(BVTP3 × 8)
5 MAIN board
1 three screws
(BVTP3 × 8)
4 two PC board holders