Filter
Top Products
99
GB
D:\NORM'S JOB\SONY HA\SO0056\STR-DA3500ES\CEL VERSION\GB\4144907431\01GB-
STRDA3500ESUC\090OTH_GB.fm
masterpage: Right
STR-DA3500ES
4-144-907-43(1)
Other Operations
I SP A/SP B/
SP A+B
Lights up according to the
speaker system used (page 44).
However, these indicators do
not light up if the speaker
output is turned off or if
headphones are connected.
J SLEEP Lights up when the sleep timer
is activated.
K ZONE 2/
ZONE 3
Lights up while operation in
zone 2/zone 3 is being enabled.
L A.DIRECT Lights up when the receiver is
processing Analog Direct
signals.
M Tuner
indicators
Lights up when using the
receiver to tune in radio
stations, etc.
N MEM Lights up when a memory
function, such as Preset
Memory, etc., is activated.
O ; PL/
; PL II/
; PL IIx
“; PL” lights up when the
receiver applies Dolby Pro
Logic processing to 2 channel
signals in order to output the
center and surround channel
signals.
“; PL II” lights up when the
Dolby Pro Logic II decoder is
activated.
“; PL IIx” lights up when the
Dolby Pro Logic IIx decoder is
activated.
However, these indicators do
not light up if there are no
center and surround speakers
and you select a sound field
using the A.F.D. button.
P BI-AMP Lights up when “Sur Back
Assign” is set to “BI-AMP”.
Q EQ Lights up when the equalizer is
activated.
R NEO:6 Lights up when DTS Neo:6
Cinema/Music decoder is
activated.
S DTS-HD
MSTR/
DTS-HD HI
RES
“DTS-HD MSTR” lights up
when the receiver is decoding
DTS-HD Master Audio
signals.
“DTS-HD HI RES” lights up
when the receiver is decoding
DTS-HD High Resolution
signals.
Name Function
T LPCM Lights up when Linear PCM
signals are detected.
U ANALOG Lights up when
– INPUT MODE is set to
“AUTO” and no digital signal
is being input through the
COAXIAL, OPTICAL or
HDMI jacks.
– INPUT MODE is set to
“ANALOG”.
– the “2ch Analog Direct” is
being used.
V DMPORT Lights up when DIGITAL
MEDIA PORT adapter is
connected and “DMPORT” is
selected.
W MULTI IN Lights up when multi channel
input is selected.
X HDMI Lights up when the receiver
recognizes a component
connected via an HDMI IN
jack.
Y Playback
channel
indicators
L
R
C
SL
SR
S
SB L
SB R
SB
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound (based on the speaker
settings).
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Surround Back Left
Surround Back Right
Surround Back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
When Speaker Pattern is set to
“3/0.1” (page 105)
Sound Field: A.F.D. AUTO
Name Function
SW
L
CR
SL SR